Font Size

SCREEN

Profile

Layout

Direction

Menu Style

Cpanel

Sodium Amide (Sodamide)(NaNH2)

     MATERIAL SAFETY DATA SHEET                                                                             


 Section 1 – Chemical Product and Company Identification:

Product Name SODIUM AMIDE
Synonyms Sodamide
Company Identification            

NATRIZEN CHEMICALS PVT. LTD. SURVEY. NO. 54A, MALYALA (V), BOMMALA RAMARAM (M),NALGONDA (DT) – 508126, A.P., INDIA

For information, call +91 9948047535
Emergency Number +91 9849645406
For CHEMTREC assistance, call +91 40-29809095
For International CHEMTREC assistance, call           +91 9849645406

 Section 2 – Composition, Information on Ingredients:

CAS NO Chemical Name Percent EINECS / ELINCS NO
7782-92-5 Sodium Amide > 98 % 231-971-0

Section 3 – Emergency Overview:

Appearance White crystalline powder.  
Caution Causes eye and skin burns.  Causes digestive and respiratory tract burns. Reacts violently with water.  May form explosive peroxides. 
Target Organs Eyes, skin, mucous membranes

 Potential Health Effects:

Eye Causes eye burns, may cause eye injury
Skin Causes skin burns
Ingestion Causes gastrointestinal irritation with nausea, vomiting and diarrhea.  Causes gastrointestinal tract burns
Inhalation May cause irritation of the respiratory tract with burning pain in the nose and throat, coughing, wheezing, shortness of breath and pulmonary edema.  Causes chemical burns to the respiratory tract.  Inhalation may be fatal as a result of spasm, inflammation, edema of the larynx and bronchi, chemical pneumonitis and pulmonary edema
Chronic No Information found

   Section 4 – First Aid Measures: 

Eyes Immediately flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids.  Get medical aid immediately
Skin Flush skin with plenty of water for at least 15 minutes while removing contaminated clothing and shoes.Get medical aid immediately.
Ingestion Do NOT induce vomiting.  If conscious and alert, rinse mouth and drink 2-4 cupfuls of milk or water.Get medical aid immediately.
Inhalation Remove from exposure and move to fresh air immediately.  If not breathing, give artificial respiration.  If breathing is difficult, give oxygen.Get medical aid immediately.

    Section 5 – Fire Fighting Measures:

General Information As in any fire, wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. Sodium Amide reacts violently with water forms NaOH and NH3
Extinguishing Media Use dry sand or earth to smother fire.  Do NOT use carbon dioxide.  DO NOT USE WATER OR FOAM
Flash Point Not available
Auto-ignition Temperature 450 deg C (842.00 deg F)
Explosion Limits, Lower Not available 
Explosion Limits, Upper                       Not available

NFPA Rating  (estimated)                             

Health: 3; Flammability: Instability; Special Hazard: -W-

  Section 6 – Accidental Release Measures:

General Information Use proper personal protective equipment as indicated in Section 8
Spills / Leaks Vacuum or sweep up material and place into a suitable disposal container
Provide ventilation Do not get water inside container

  Section 7 – Handling and Storage:

Handling Wash thoroughly after handling.  Remove contaminated clothing and wash before reuse. Do not breathe dust, vapor, mist, or gas.  Do not get in eyes, on skin, or on clothing.  Use only in a chemical fume hood
Storage Store in a cool, dry place. Store in a tightly closed container.  Keep under a nitrogen blanket. Water free area. Containers should be dated when opened and tested periodically for the presence of peroxides.  All peroxidizable substances should be stored away from heat and light and be protected from ignition sources

  Section 8 – Exposure Controls, Personal Protection:

Engineering Controls Facilities storing or utilizing this material should be equipped with an eyewash facility and a safety shower.  Use adequate ventilation to keep airborne concentrations low

Exposure Limits:

Chemical Name ACGIH NIOSH OSHA-Final PELs
Sodium Amide None listed None Listed None Listed

 

OSHA Vacated PELs Sodium Amide: No OSHA Vacated PELs are listed for this chemical

 

Personal Protective Equipment

 

Eyes Wear Chemical splash goggles
Skin Wear appropriate protective hand gloves and clothing to prevent skin exposure
Respirators Follow the OSHA respirator regulations found in 29 CFR 1910.134 or European Standard EN 149.  Use a NIOSH / MSHA or European Standard EN 149 approved respirator if exposure limits are exceeded or if irritation or other symptoms are experienced.

Section 9 – Physical and Chemical Properties:

Physical State Crystalline powder
Appearance grey / white
Odor Ammonia-like
PH Not available
Vapor Pressure Not available
Vapor Density Not available
Evaporation Rate Not available
Viscosity Not available
Boiling Point 400 deg C 
Freezing / Melting Point 210 deg C
Decomposition Temperature 500 deg. C
Specific Gravity / Density Not available
Molecular Formula H2NNa
Molecular Weight 39.01

 Section 10 – Stability and Reactivity:

Chemical Stability When exposed to the atmosphere, Sodium Amide rapidly absorbs H2O and CO2. When only limited absorption takes place, as in poorly sealed containers, peroxides are formed which render the resulting mixture highly explosive. The formation of peroxides is accompanied by the development of a yellow / brownish color. If discoloration is noticed, the substance should be destroyed at once by covering with much benzene, toluene, or kerosene and slowly adding diluted ethanol with stirring
Conditions to Avoid Ignition sources, dust generation, exposure to air, excess heat, exposure to moist air or water
Incompatibilities with other Materials Potassium chlorate and chromic anhydride. Sodium Amide reacts violently with water forms NaOH and NH3.  The reaction with alcohol is considerably slower
Hazardous Decomposition Products Nitrogen Oxides, ammonia, sodium hydroxide
Hazardous Polymerization Has not been reported

 Section 11 – Toxicological Information:

RTECS# CAS# 7782-92-5 unlisted
LD50/LC50 Not available
Carcinogenicity CAS# 7782-92-5: Not listed by ACGIH, IARC, NTP, or CA Prop 65
Epidemiology No data available
Teratogenicity No data available
Reproductive Effects No data available
Mutagenicity No data available
Neurotoxicity No data available
Other Studies  

Section 12 – Ecological Information:

No information available.

Section 13 – Disposal Considerations:

Chemical waste generators must determine whether a discarded chemical is classified as a hazardous waste.  US EPA guidelines for the classification determination are listed in 40 CFR Parts 261.3.  Additionally, waste generators must consult state and local hazardous waste regulations to ensure complete and accurate classification. RCRA P-Series: None listed. ECRA U-Series: None listed. 

Section 14 – Transport Information:

  Shipping Name Hazard Class UN Number Packaging Group
US DOT Water Reactive Solid, Corrosive N.O.S  4.3 UN3131 II
Table Cell Water Reactive Solid, Corrosive N.O.S. (SODIUM AMIDE)  4.3  UN3131 II

 Section 15 – Regulatory Information:


TSCA CAS# 7782-92-5 is listed on the TSCA inventory
Health & Safety Reporting List None of the chemicals are on the Health & Safety Reporting List.
Chemical Test Rules None of the chemicals in this product are under a Chemical Test Rule.
Section 12b None of the chemicals are listed under TSCA Section 12b
TSCA Significant New Use Rule None of the chemicals in this material have a SNUR under TSCA
SARA Section 302 (RQ), none of the chemicals in this material have an RQ
Section 302 (TPQ) None of the chemicals in this product have a TPQ.
Section 313 No chemicals are reportable under Section 313
Clean Air Act This materialnts does not contain any hazardous air pollutants or Class I Ozone depletors or Class 2 Ozone depletors.
Clean Air Act None of the chemicals in this product are listed as Hazardous Substances, priority pollutants or toxic pollutants under the CWA
OSHA None of the chemicals in this product are considered highly hazardous by OSHA

 Section 16 – Other Information:

MSDS Creation Date 23/06/2007
Revision # 3 Date 02/07/2013

 


 

The information above is believed to be accurate and represents the best information currently available to us. However, we make no warranty of merchantibility or any other warranty, express or implied, with respect to such information, and we assume no liability resulting from its use. Users should make their own investigations to determine the suitability of the information for their particular purposes. In no event shall Natrizen Chemicals pvt ltd or its partners be liable for any claims, losses, or damages of any third party or for lost profits or any special, indirect, incidental, consequential, or exemplary damages howsoever arising, even if the company has been advised of the possibility of such damages. For questions please contact www.natrizen.com